| Since its
introduction in June 2004, the TNX has dominated the U.S. R/C racing
truck scene with a series of impressive wins, including Monster
Madness and the Pro-Line Nitro Maxx Challenge. We now proudly announce
our next generation Ready-to-Run nitro monster truck: the TNX 5.2R
which is designed to continue this victorious trend with even greater
top speeds and performance. |
|
|
|
| The new TNX
engine features a rear exhaust pipe for bursts of power, pushing this
R/C Monster truck to the front of the pack with explosive acceleration
and extreme top speeds. The high performance 5.2cc .32 (cubic inch)
engine features a slide valve carburetor for optimum response. The New
TGM-04 chassis features a 2-speed transmission for reliable shifting
and ball pivot suspension equipped with 4 large capacity oil dampers
for excellent handling and stability. The Ultra tough chassis frame
features reinforced and heavy-duty parts built to take on all kinds of
terrain. Steel drive shafts provide improved durability and excellent
performance, without adding unnecessary weight. Fully-equipped weight
of the new TNX is drastically reduced, weighing in at 4,300g. This is
a full 100g lighter than the original TNX, and compares favorably with
most 1/10 scale monster trucks. |
2-Speed
 |
|
Compact 2-speed
transmission fitted with a hook style clutch guarantees secure and
stable gear changing. Features metal
spur gear for heightened durability. Slipper clutch protects gears
from shocks and can be adjusted by tightening nut. |
4WD
 |
|
Shaft driven 4WD
chassis transmits engine power from transmission located in the middle
of chassis to front and rear wheels via metal drive shafts. Ball pivot
type four wheel double wishbone suspension and large capacity oil
dampers ensure unbeatable off-road performance. |
Fail-Safe
 |
|
Lightweight and
compact receiver equipped with fail safe device. The device prevents
out of control driving caused by radio interference or low battery
power by returning throttle servo to neutral or Brakes |
High Torque Servo
 |
|
The compact yet
high-torque steering servo accurately guides the 148mm large diameter
wheels. It provides sharp steering response. |
Full Ball Bearings
 |
|
A total 26 pcs. of
ball bearings are employed from wheel axles to propeller shafts in
gearboxes. Bearings minimize friction loss, ensure smooth movement and
extend life of rotating parts. |
Adspec GP 2-channel transmitter
 |
|
Wheel/trigger type
transmitter included. Simply turn the wheel for steering, pull/push
the trigger for acceleration and braking. |
Electric Handy Starter Included
 |
|
Engine can be
started without removing body Set plug heater into the engine and
insert starter into gear unit. Engine can be easily started by pushing
button.
*7.2V and C alkaline batteries are sold separately.. |
High Powered 5.2cc FR-32FX Engine
 |
|
The rugged and road-eating
TNX 5.2R comes with a Tamiya FR-32FX engine featuring large diameter
slide carburetor, 14mm crank shaft, lightweight piston and large heat
sink head. The monster size engine features 5.2cc displacement and
provides enormous power and blistering fast top speeds that are
certain to demolish the competition! |
PDF's
Movies
Για να δείτε τα
Video,
κάνετε
"right click" και
"Save_Target_as"
|
|
|
 Download
Video (High Speed Connection)
WMV 640x480 pixel 1min 13sec. (16.12MB)
Download
Video (High Speed Connection)
MPG 640x480 pixel
1min 13sec. (4.18MB)
*After saving the video to disk, you can play it
using either Windows Media Player or Quick Time Player
Download
Video (High Speed Connection)
WMV 640x480 pixel 18sec. (13.04MB)
*After saving the video to disk, you can play it
using either Windows Media Player or Quick Time Player
|
|
Download
Video (High Speed Connection)
WMV 640x480 pixel 18sec. (20.13MB)
*After saving the
video to disk, you can play it using either Windows Media Player or
Quick Time Player |
| |
|
| |
Download
Video (High Speed Connection)
WMV 640x480 pixel 18sec. (2MB)
*After saving the
video to disk, you can play it using either Windows Media Player or
Quick Time Player |
| |
Download
Video (High Speed Connection)
WMV 640x480 pixel 18sec. (20.63MB)
*After saving the video to disk, you can play it using either Windows
Media Player or Quick Time Player |
| |
Download
Video (High Speed Connection)
WMV 640x480 pixel 18sec. (32.25MB)
*After saving the video to disk, you can play it using either Windows
Media Player or Quick Time Player |
| |
|
| |
|
About the model
- 1/8 Ready-To-Run R/C
Glow Engine Monster Truck on a shaft driven 4WD TGM-04 Chassis.
- Lightweight and
compact TRU-03 Receiver features failsafe function to prevent runaway
driving caused by radio interference or low battery power.
- Comes with external
electric Tamiya Handy Starter with drive gear unit and plug heater.
- Wheel/trigger type
transmitter included.
- Features newly
developed high-density, oval spike tires and dish wheels.
- Ball pivot type 4
wheel double wishbone suspension features 4 large capacity oil dampers.
- Features 2-speed
transmission with metal spur gear and slipper clutch for heightened
durability.
- Powerful 5.2cc (.32
cubic inch) FR-32FX engine with slide valve carburetor.
- A total of 26 ball
bearings used to ensure smooth and efficient movement.
- Reinforced steel
drive shafts.
- AA & C Batteries,
engine fuel are separately required to operate truck.
- Tune-up truck with
Tamiya Option Parts. Add separately available oil dampers and springs to
attach a total of 8 dampers. Other option parts such as brake arm & disc,
suspension mount & hex wheel hub will further upgrade and improve
performance.
RTR NITRO XB KITS REQUIRE:
(unless
stated differently above)
- Battery: 4AA for
Receiver 8AA for Transmitter
- Fuel: Nitro Glow Fuel
- Starting Equipment:
Glow igniter
- Misc. Items: Building
and track equipment
|
